visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 6080 j 5050 s 2 hf rev b ultra low profile 0805 power divider 50 to 50 description the PD6080J5050S2HF is a low profile, subminiatur e wilkinson power divider in an easy to use surface mount package. the pd6080j5 050s2hf is ideal for high volume manufacturing and delivers higher performanc es than traditional printed and lumped element solutions. the PD6080J5050S2HF is m atched to 50 and has a height profile of 0.5 mm which is ideal for high le vel integrations in the following markets: rfid, fixed satellite, and mobile satellit e. the PD6080J5050S2HF does not include the resistive element and therefore, re quires an external resistor for operation. the PD6080J5050S2HF is available on tap e and reel for high volume manufacturing pick and place. detailed electrical specifications: specifications subject to change without notice. room (25 c) parameter min. typ. max unit frequency 6000 8000 mhz input port impedance 50 output port impedance 50 return loss 9 12 db insertion loss* 0.6 0.9 db amplitude balance 0.2 0.5 db phase balance 2 5 degrees isolation (output ports) 12 15 db power handling 2 watts features: ? 60008000 mhz ? 15 db isolation (output ports) ? good return loss ? 0.5mm height profile ? 50 input / 50 outputs ? low insertion loss ? surface mountable ? tape & reel ? nonconductive surface ? rohs compliant ? halogen free operating temperature 55 +85 oc * insertion loss stated at room temperature (insert ion loss is approximately 0.1 db higher at +85 oc) outline drawing mechanical outline dimensions are in millimeters 2.040.10 1.290.10 0.440.04 1 2 3 6 5 6x 0.30 6x 0.22 4x 0.65 6x 0.98 orientation marker denotes pin location 4 orientation marker denotes pin location top view (near side) side view bottom view (far side) 2x 0.15 4x 0.37 designation gnd input gnd output 1 gnd output 2 5 4 2 16 3 pin
visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 6 0 8 0 j5050 s 2 hf rev b typical broadband performance: 10 mhz. to 8.01 ghz. return loss input 36 33 30 27 24 21 18 15 12 9 6 3 0 10 510 1010 1510 2010 2510 3010 3510 4010 4510 5010 5510 6010 6510 7010 7510 8010 frequency [mhz] [db] insertion loss 3.6 3.2 2.9 2.5 2.2 1.8 1.4 1.1 0.7 0.4 0.0 10 510 1010 1510 2010 2510 3010 3510 4010 4510 5010 5510 6010 6510 7010 7510 8010 frequency [mhz] [db] amplitude balance 2.0 1.5 1.0 0.5 0.0 0.5 1.0 1.5 2.0 10 510 1010 1510 2010 2510 3010 3510 4010 4510 5010 5510 6010 6510 7010 7510 8010 frequency [mhz] [db] phase balance 20 15 10 5 0 5 10 15 20 10 510 1010 1510 2010 2510 3010 3510 4010 4510 5010 5510 6010 6510 7010 7510 8010 frequency [mhz] [deg] isolation 36 33 30 27 24 21 18 15 12 9 6 3 0 10 510 1010 1510 2010 2510 3010 3510 4010 4510 5010 5510 6010 6510 7010 7510 8010 frequency [mhz] [db]
visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 6080 j 5050 s 2 hf rev b typical performance: 5950 mhz. to 8010 mhz. return loss input 36 33 30 27 24 21 18 15 12 9 6 3 0 5950 6100 6250 6400 6550 6700 6850 7000 7150 7300 7450 7600 7750 7900 frequency [mhz] [db] insertion loss 3.6 3.2 2.9 2.5 2.2 1.8 1.4 1.1 0.7 0.4 0.0 5950 6100 6250 6400 6550 6700 6850 7000 7150 7300 7450 7600 7750 7900 frequency [mhz] [db] amplitude balance 2 1.5 1 0.5 0 0.5 1 1.5 2 5950 6100 6250 6400 6550 6700 6850 7000 7150 7300 7450 7600 7750 7900 frequency [mhz] [db] phase balance 20 15 10 5 0 5 10 15 20 5950 6100 6250 6400 6550 6700 6850 7000 7150 7300 7450 7600 7750 7900 frequency [mhz] [deg] isolation 36 33 30 27 24 21 18 15 12 9 6 3 0 5950 6100 6250 6400 6550 6700 6850 7000 7150 7300 7450 7600 7750 7900 frequency [mhz] [db]
visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 6 0 8 0 j5050 s 2 hf rev b mounting configuration: in order for xinger surface mount components to wor k optimally, the proper impedance transmission line s must be used to connect to the rf ports. if this condition is not satisfied, insertion loss, isolation and vs wr may not meet published specifications. an example of the pcb footprint used in the testing of these parts is shown below. in specific designs , the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. in addition, s ince the PD6080J5050S2HF is a wilkinson power divid er, an external 0603 10 0 resistor must be mounted in locations r1 as show n in the figure below. all of the xinger components are constructed from c eramic filled ptfe composites which possess excelle nt electrical and mechanical stability having x and y thermal coe fficient of expansion (cte) of 17 ppm/ o c. pad footprint w/ 0603 resistor location circuit pattern footprint pad (s) solder resist mounting footprint dimensions are in millimeters 6x .41 6x .33 .04 4x .25 .66 3x plated thru holes to ground 3x transmission lines r1
visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 6080 j 5050 s 2 hf rev b packaging and ordering information parts are available in reels and are packaged per e ia 4812. parts are oriented in tape and reel as s hown below. minimum order quantities are 4000 per reel. see model numbers be low for further ordering information . .25 2.41 1.75 3.50 4.00 1.60 8.00 4.00 2.00 .81
|
